Earthbind®100 is a quality, versatile and environmentally friendly bio-based modified asphalt emulsion specifically engineered for dust control of unpaved surfaces constructed of native material.
Earthbind® 100 was developed to meet the need for a quality and environmentally friendly product that can be safely stored and easily applied. Earthbind® 100 is applied to successfully combat fugitive dust on roads constructed with native soils.
As a dust palliative, Earthbind®100 works by binding loose soil or aggregate particles together, strengthening the soil and aggregate matrix and preventing even the smallest particles from becoming airborne as fugitive dust. In addition, Earthbind®100 will add water resistance to the treated soil particles and will not re-solubilize in rainwater and wash off the road after curing. This is especially important in areas where the mitigation of sediment runoff from unpaved roads into streams is imperative.
Earthbind®100 is sold and transported in a liquid concentrate and is diluted in water prior to application. In addition to suppressing dust, Earthbind®100 can also be used as an environmentally friendly base stabilizer.
As a dust palliative, Earthbind® 100 provides:
-
Superior dust cohesion and suppression
-
Efficient dust control under a variety of conditions
-
Excellent penetration of a road surface without pre-watering
-
Applies quickly without road closures using a water truck or pressurized distributor truck
-
Easily washes off of equipment and vehicles before curing
All components of Earthbind® 100 are considered:
-
Free of hazardous solvents
-
Non-flammable
-
Non-corrosive to metal
-
Non-hazardous waste
-
Not considered to be harmful to aquatic and mammal life
-
Not considered to be carcinogenic
Earthbind® Stabilizer is a quality, versatile and environmentally friendly bio-based modified asphalt emulsion specifically engineered for dust control and topical stabilization of unpaved surfaces constructed of aggregate or sands. Earthbind Stabilizer was developed to meet the need for a quality and environmentally friendly product that can be safely stored and easily applied. Earthbind Stabilizer is applied to successfully combat fugitive dust and to stabilize the road surface on many different types of unpaved, low-volume roads, parking lots, railroad yards, industrial sites, mining roads, military operations, private and public market sectors.
As a dust palliative and soil stabilizer, Earthbind Stabilizer works by binding loose soil or aggregate particles together, strengthening the soil and aggregate matrix and preventing even the smallest particles from becoming airborne as fugitive dust. In addition, Earthbind Stabilizer will add water resistance to the treated soil particles and will not re-solubilize in rainwater and wash off the road after curing. This is especially important in areas where the mitigation of sediment runoff from unpaved roads into streams is imperative.
Earthbind Stabilizer is sold and transported in a liquid concentrate and is diluted in water prior to application. In addition to suppressing dust, Earthbind can also be used as an environmentally friendly road base stabilizer.
As a dust palliative, Earthbind Stabilizer provides:
-
Superior dust cohesion and suppression
-
Efficient dust control under a variety of conditions
-
Excellent penetration of a road surface without pre-watering
-
Applies quickly without road closures using a water truck or pressurized distributor truck
-
Easily washes off of equipment and vehicles before curing
All components of Earthbind® Stabilizer are considered:
-
Free of hazardous solvents
-
Non-flammable
-
Non-corrosive to metal
-
Non-hazardous waste
-
Not considered to be harmful to aquatic and mammal life
-
Not considered to be carcinogenic
Sustainable • Cost-Effective • High Performance
Iridan specializes in the reuse and stabilization of RAP for roads, parking areas, logistics yards, industrial yards, and similar applications.
RAP (Recycled Asphalt) is produced by milling existing asphalt pavements and reusing the material as a durable base or surface layer.
Why Use RAP?
-
Sustainable recycling solution
-
Environmentally friendly - reduced carbon footprint
-
Significant cost savings compared to hot asphalt paving
-
Fast implementation using standard earthwork equipment
When properly placed and compacted, RAP (Recycled Asphalt) forms a strong, durable, monolithic surface suitable for heavy traffic and intensive operational use.
RAP Stabilization with EB STB
By applying Arsabind Stabilizer (EB STB) - manufactured by us in Israel - directly onto the RAP surface and compacting it immediately with a roller, high-quality and long-lasting results can be achieved.
The stabilized surface provides:
-
Excellent load-bearing capacity
-
Smooth driving comfort
-
Operational performance comparable to newly paved asphalt
-
Reduced maintenance over time
Best Practices for RAP Application.
Base Preparation.
For optimal results, RAP should be placed over an engineered base layer (aggregate or subbase).
Layer Thickness.
A minimum compacted thickness of approximately 25 cm is recommended, depending on:
-
Traffic volume
-
Axle loads
-
Vehicle types
Subgrade Considerations
Placing RAP directly on heavy or clay soils is not recommended, as it increases the risk of early cracking, deformation, and settlement.
RAP Quality
-
Fresh RAP, applied close to the milling date, requires lower stabilizer dosages
-
Stockpiled RAP typically requires higher dosages to achieve equivalent performance
-
Best results are obtained from RAP originating from the upper asphalt layer of the milled pavement
Spreading & Shaping
-
Preferred method: grader, ensuring uniform thickness and proper cross-slopes
-
Small or confined areas: loader with a smooth blade bucket only (no toothed buckets)
Environmental & Safety Characteristics of EB STB
EB STB is designed for use in sensitive environments and active sites:
-
Non-flammable
-
Completely non-corrosive
-
Free of hazardous substances and waste materials
-
Safe for water sources and approved for use near water bodies
-
Safe for animals and agricultural crops
-
Non-carcinogenic
Typical Applications
-
Dirt and secondary roads
-
Industrial and logistics yards
-
Parking areas
-
Temporary or permanent access roads
-
Heavy-duty service yards
Looking to Upgrade Roads or Yards Using RAP?
Iridan provides:
-
Material supply
-
Application guidelines
-
On-site technical support
Earthbind® is a quality, versatile and environmentally-friendly modified bio polymer products family.
Our Bio polymer used in a proprietary composition based on trade secret.
Unlike most similar products, ours is not a waste from other industries like paint and adhesives.
The Earthbind® is an Eco-friendly material, non-toxic and has environmental credentials of all factors relevant to the subject including US agencies.
Our range of products are quality, versatile and environmentally-friendly.
Our blend can be customized in different compositions according purpose of use.
We provide our customers with world leading products for unpaved roads stabilization and dust control on unpaved roads.
LAS 320 – Asphalt Surface Renewal and Protection
Iridan is the exclusive importer and distributor of a high-performance material designed for the renewal and protection of asphalt surfaces against a wide range of environmental and operational hazards.
LAS 320 is an advanced asphalt sealing and rejuvenation product that protects asphalt from the effects of aging, including moisture penetration, cracking, abrasion, and damage caused by fuels and oils, while also providing overall surface renewal with a fresh, clean, and aesthetically improved appearance.
LAS 320 was developed using advanced technology and is in use on military takeoff and landing runways by the U.S. Army, as well as at civilian airports throughout North and South America. In addition, it is widely applied on asphalt surfaces in the commercial and public sectors, including logistics centers, parking facilities, industrial plants, and similar applications, as well as private residential asphalt surfaces.
LAS 320 is a high-performance, advanced alternative to traditional asphalt sealers and provides long-term protection for asphalt surfaces.
Unlike conventional sealers that form only a surface coating, LAS 320 is a polymer-based emulsion that penetrates deeply into the asphalt, integrates with its internal structure, and delivers more effective and long-lasting protection, in addition to sealing.
Key Features of LAS 320
-
A polymer emulsion that penetrates deep into the asphalt, unlike conventional sealers that only coat the surface externally.
LAS 320 is absorbed into the asphalt and forms an internal bond with its components, providing superior and longer-lasting protection. -
Rapid drying time following application — typically within 15–20 minutes — significantly reducing traffic disruption and minimizing the risk of tire pickup and tracking marks, a common issue with many other sealing products.
-
Formulated as a non-toxic, environmentally friendly solution.
LAS 320 is easy and fast to apply.
Benefits for Asphalt Surface Protection:
-
Protection against water damage, fuel and oil spills, chemical exposure, and UV radiation.
These protections prevent asphalt softening caused by fuels, oils, and chemicals; damage from water and freeze–thaw cycles; and the drying and degradation of the bitumen binder due to UV exposure. -
Helps preserve asphalt flexibility and structural integrity by sealing the surface and preventing the loss of essential hydrocarbons.
Maintenance and Reapplication
LAS 320 is designed to provide effective protection for 7 to 10 years before reapplication is required.
This represents a significant and substantial advantage compared to conventional asphalt sealing products.
